(These are general guidelines.)
Easy 5-Minute Installation: 2Pcs Door Armor MINI Door Shields
Before you begin:
- Gather your tools: Drill, screwdriver, pencil.
- Choose your installation location. Ideally, center the Door Armor MINI Door Shields over your deadbolt and doorknob (if applicable).
Step 1: Mark the Position
- Hold the Door Armor MINI Shield in place on the door, ensuring it doesn't interfere with lock operation.
- Use a pencil to mark the screw holes through the designated slots on the shield onto the door.
Step 2: Drill Pilot Holes (Optional)
- For a smoother installation, pre-drill small pilot holes at each marked point using a drill bit slightly smaller than the screw diameter (usually included with the Door Armor MINI Door Shields).
Step 3: Secure the Door Armor MINI Shield
- Align the Door Armor MINI Shield with the marked points.
- Use the provided screws and a screwdriver to securely fasten the shield to the door. Ensure the screws are snug but not overtightened.
Step 4: Test and Enjoy!
- Open and close the door multiple times to confirm the Door Armor MINI Shield doesn't obstruct lock operation.
- Repeat steps 1-3 to install the second Door Armor MINI Shield on the other side of the door (if applicable).
Additional Tips:
- If your door has a decorative trim around the lockset, you might need to make slight adjustments to the Door Armor MINI Shield placement for proper fit.
- Door Armor MINI Door Shields come in three colors (White, Aged Bronze, and Satin Nickel). Choose the color that best complements your door for a discreet yet effective security upgrade.
Safety Note:
- While installing the Door Armor MINI Door Shields, be cautious when using drilling tools. Wear safety glasses to protect your eyes from debris.