Product Installation Instructions

  • 2Pcs Door Armor MINI Door Shields Lock Security Plates

    (These are general guidelines.) Easy 5-Minute Installation: 2Pcs Door Armor MINI Door Shields Before you begin: Gather your tools: Drill, screwdriver, pencil. Choose your installation location. Ideally, center the Door Armor MINI Door Shields over your deadbolt and doorknob (if applicable). S...

  • 46" Door Armor Jamb Shield - Ultimate Door Security Easy Install

    (These are general guidelines.) How to Install a 46" Door Armor Jamb Shield for Ultimate Door Security (Easy Install) This guide will walk you through installing a 46" Door Armor Jamb Shield on your door. The jamb shield reinforces the lock strike plate area of your door frame, enhancing your h...

  • 81 Inch Long Reach Bronze Weatherstrip for Doors & Bullnose Gaps

    (These are general guidelines.) Simple Installation: Clean and dry the door frame surface where the weatherstrip will be applied. Measure your door frame and cut the weatherstrip to size (if necessary). Apply the weatherstrip to the designated area on the door frame. Press the weatherstrip firm...

  • Door Armor Double Door Security Kit with Night Lock System

    (These are general guidelines.) Installation Process: 1. Prepare the Night Lock (for floor mounting): Important Note: This step requires drilling into the floor. If you have tile flooring, consider consulting a professional for proper installation to avoid damaging the tiles. Place the Night L...

  • Door Armor Double Door Security Kit Without Night Lock

    (These are general guidelines.) Tools you'll need: Drill (with appropriate drill bits for pilot holes and screw size) Pencil Tape Measure Screwdriver Level (optional) Here's how to install your Door Armor Double Door Security Kit: Prep and Measure: Close both doors. Using the tape measure, mar...

  • Door Armor Latch Sliding Door Deadbolt - Easy Install in Minutes

    (These are general guidelines.) Easy Installation Process (General Steps): Gather your tools: You'll likely need a screwdriver and measuring tape (check the manufacturer's instructions for specifics). Position the Latch: Place the Armor Latch on the door frame according to the included instruct...

  • Door Armor Low Profile Door Shields Discreet Protection

    (These are general guidelines.) Before you begin: Ensure your Door Armor Low Profile Door Shields match your door's lockset spacing (5-1/2" on-center). Gather the following tools: head screwdriver Pencil (optional) Installation Steps: Remove Existing Hardware (Optional): For optimal fit, remov...

  • Door Armor MAX Single Door Security Kit

    (These are general guidelines.) Tools You'll Need: Drill Permanent marker Tape (optional) Safety glasses (recommended) What's Included: 1 Door Jamb Shield (46" length) 2 Door Shields (4" length each) 2 Hinge Shields (12" length each) 17 Self-tapping screws Installation Steps: Prepare your doo...

  • Door Armor MINI Single Door Security Kit

    Notes:  These are general guidelines only! Door Armor MINI Single Door Security Kit: Installation Guide Before you begin: Gather your tools: Drill, drill bits (appropriate size for screws), Phillips head screwdriver (optional), tape (optional) Make sure your door is closed and locked. Identif...

  • My Door is Too Tight - Door Armor Won't Fit

    We always try to make sure that people perform the 2 quarter test before purchasing Door Armor.  If your door is too tight, there are a few tricks that you can try. Try to over-tighten the screws in the middle hinge and hinge shield.  Believe it or not, this will often create more room on the ot...