Door Armor MAX Single Door Security Kit

(These are general guidelines.)

Tools You'll Need:

• Drill
• Permanent marker
• Tape (optional)
• Safety glasses (recommended)

What's Included:

• 1 Door Jamb Shield (46" length)
• 2 Door Shields (4" length each)
• 2 Hinge Shields (12" length each)
• 17 Self-tapping screws

Installation Steps:

1. Prepare your door: Ensure your door is clean and free of debris. It's recommended to remove any existing strike plate covers.
2. Install the Jamb Shield:
   • Place the Jamb Shield on the inside of your door frame, aligning it with the strike plate area.
   • Use a marker to mark the screw holes on the Jamb Shield through the pre-drilled holes onto the door frame.
   • (Optional) Use tape to hold the Jamb Shield in place while marking.
   • Pre-drill pilot holes in the marked locations on the door frame using your drill. (Tip: Pre-drilling helps prevent cracks and ensures smooth screw installation.)
   • Secure the Jamb Shield to the door frame using the provided screws.
3. Install the Door Shields:
   • Position each Door Shield on the inside of your door, aligning them on either side of the door handle/knob.
   • Mark the screw holes on the Door Shields through the pre-drilled holes onto the door.
   • Pre-drill pilot holes in the marked locations on the door using your drill.
   • Secure each Door Shield to the door using the provided screws.
4. Install the Hinge Shields (if applicable):
   • Note: Hinge shields are not included in the MINI Kit.
   • Place each Hinge Shield on the inside of your door frame, aligning them with the top and bottom door hinges.
   • Mark the screw holes on the Hinge Shields through the pre-drilled holes onto the door frame.
   • Pre-drill pilot holes in the marked locations on the door frame using your drill.
   • Secure each Hinge Shield to the door frame using the provided screws.
5. Test and Enjoy!
   • Once everything is installed, open and close your door to ensure smooth operation.
   • Celebrate! Your door is now significantly more secure.

Additional Tips:

• Double-check all measurements and markings before drilling.
• Ensure your drill bit size matches the screw size.
• Wear safety glasses for protection while drilling.
• Consider having a helper hold the components in place while marking or drilling (especially for the Jamb Shield).

View Door Armor MAX Single Door Security Kit